The Fenix ARE-X2 smart charger is designed for many types of batteries such as 26650, 18650, 16340, 14500, and 10440 batteries. It features Micro USB charging and USB discharging, LED charging and discharging indicators, LED battery power indicator, and a four security protection design. With the LED battery power indicator, you will never have to worry about not knowing the status of your battery.
Supportable Micro USB charging and USB discharging
USB port for charging other devices
Preferred discharging channel will be the left slot. If the left slot does not contain Li-ion battery, then the right channel will be checked for a Li-ion battery. If there is a Li-ion battery in the right channel, then the right channel will chosen to discharge.
When the discharging voltage is 3.0V, then discharging will cease.
Blue LED will flash when discharging starts. It will go out when the discharging is complete.
Ni-MH and Ni-CD batteries WILL NOT operate the discharging feature of the ARE-X2. You won't be able to charge a device using those batteries.
Does not require two batteries loaded to discharge
LED charging/discharging indicator
LED battery power detection
Four levels of security
Automatically chooses correct charging mode for each battery
Two channels work independently, Allows simultaneous charging of different battery types
Discharging current is automatically chosen for optimal discharge
Input: DC 5V, Maximum 1.5A
DC 5V, 1.5A: 18650, 26650
DC 5V, 1.0A: 16340, 14500, 10440
Size: 4.5 inches (115mm) X 2.5 inches (63mm) X 1.2 inches (30mm)
Weight excluding battery and charging cable: 3.4 oz. (96 grams)
Operating temperature: -20 degrees C - 50 degrees C (full-load in normal working condition)
Operating humidity: 5% (O degrees C) - 90% (40 degrees C) (full-load in normal working condition)
Storage conditions: Temperature -20 degrees C - 85 degrees C